Dry or wet cutting for a range medium to hard carving stone. Mainly used on stones marble hardness and harder. 

Available with optional 5/8" - 11 thread flush cut flange.

Diamond coverage in the steel core as well as the cutting surface.

No flange

w/ flange

4.5"

$29

$43

5"

$34

$48

7"

n/a

$71

9"

n/a

$96

4.5"

$22

5"

$26

Highest quality  and fastest cutting blades specially made for a variety of stone types.

Blade is mounted on a flush mount flange.

4.5"

Marble

$40

 Granite

$40

 Hard granite

$40

Dual purpose cutting and grinding blade of marble and harder stone. 

Blade is mounted on a flush mount flange.

4"

$48

5"

$55

Most popular and fastest cutting and grinding of marble and other soft stone. 

Blade is mounted on a flush mount flange.

4.5"

$58

5"

$65

Most popular and fastest cutting of marble and other soft stone. 

Price includes 5/8-11" threaded flush mount flange.

 7"

$65

9"

$75

About three times the thickness of a  typical diamond cutting blade. Can be used for carving straight on or at an angle or for cutting of wide grooves.

V-Style has a V- shaped blade that comes to a point, with a 5/8-11 flange for easy mounting.

Standard

4.5"

$72

5"

$78

Great for sculpting soft stone to marble hardness. No backing pad required.

Specify 16, 24 or 36 grit

Each

4"

$5

7"

$7

Very coarse carbide chunks rip through a range of soft stone ranging up to marble with a grit size of up to 5 mm which is a very coarse 4 grit!

4"

$16

4.5"

$18

5"

$20

Economy Grade

Diamond on edge can be used like a cutting blade

5/8" - 11 flange

40/50 grit only

Premium Grade

Diamond on edge can be used for cutting

5/8" - 11 flange

50/60 grit

Premium

4.5"

---

5"

$74

6"

$90

Our most aggressive diamond cup wheel at 25 grit. With hole, premium grade

Flat grinding surface with straight or curved edge

4.5" curved edge

Economy grade - 40/50 grit with threaded flange

Premium grade - 30/40 grit with 5/8" - 11 threaded nut

4.5"

$50

$55

1.5" width x 4.5" length

5/8" - 11 standard thread

4" diameter solid diamond cup wheel. Diamonds wrap around edges. 

5/8" - 11 standard thread

2" cup wheel on 3" shaft. For slower speed or variable speed grinders only. Max speed recommended 6000 rpm.

5/8" - 11 standard thread

Bullet Cup Wheel - $100

Solid Convex Cup Wheel - $110

2" Flat  Extension Cup Wheel - $46

no picture

2" cup wheel on 3" shaft. For slower speed or variable speed grinders only. Max speed recommended 6000 rpm.

5/8" - 11 standard thread

1.5" ball on 1.5" shaft. For slower speed or variable speed grinders only. Max recommended speed 6000 rpm.

5/8" - 11 standard thread

2" Convex Extension Cup Wheel - $52

1.5" Extension Ball Cup Wheel - $62

Brazed grinding bar - $100

no picture

30 mm (1.2"). Custom made to fit our mini angle grinders. m7 /.75 thread

- Blade - 2mm thick

- Flat cup - 8mm thick

- Convex cup - 8mm thick

5/8" - 11 standard thread

30 mm mini cup any shape - $20

Extension Football Cup Wheel - $52

Slower speed grinding than brazed tools, but will have a longer life, especially on hard stones like basalt and granite.

Aggressive - 30/40 grit

Fine - 80/100 grit

Available in aggressive or fine grits.

All cup wheels have 5/8" - 11 thread.

2" flat segmented

$30

4" flat segmented

$59

4" convex segmented

$79

4" convex continuous rim

$90

4.5" flat segmented

$85

7" flat segmented

 $169

1" width x 1.25" length bullet with 1.6" long shaft.

5/8" - 11 standard thread

2" diameter x 5/8" solid diamond cup wheel. 

5/8" - 11 standard thread

4" diameter solid diamond cup wheel. 

5/8" - 11 standard thread

Bullet Sintered Cup Wheel - $80

2" Sintered solid Cup Wheel - $70

4" x 3/4" Sintered cup wheel - $175

 no picture

2" diameter x 3/8" solid sintered diamond cup wheel with a 2" shaft.

5/8" - 11 standard thread

1.5" ball with 1.6" shaft. For slower speed or variable speed grinders only. Max recommended speed 6000 rpm.

5/8" - 11 standard thread

30 mm (1.2"). Custom made to fit our mini angle grinders.

m7 /.75 thread

2" Sintered extension Cup Wheel - $70

1.5" Sintered Extension Ball Cup Wheel - $65

Cup wheel - 8mm thick - $35

For the final stage of grinding or for the first step in polishing but not flexible like resin style pads.

Suited for wet or dry use on electric or pneumatic tools. 

Since this pad has Velcro backing it is meant to run at typical polishing speeds. 

4"

30 

$20

50

$20

Coarse flap discs are used to start smoothing a sculpture after grinding and shaping.

Used dry at any regular angle grinder speed. Does not require a backer. 

4.5"

40 grit

$10

80 grit

$10

Diamonds are embedded in a resin for wet polishing.

Economy pads currently sold only as a set

 3"

4"

 ---

---

50, 100, 200, 400, 800, 1500, 3000, black buff, white buff

 ---

$75

Diamonds are embedded in a resin for wet polishing.

 4"

5"

50, 100, 200, 400, 800, 1500, 3000

 $14

$20

Final buff - black or white

 $20

$29

Set price - 8 pieces (choose one color buff)

 $118

 $169

Diamonds embedded in metallic resin for longer life and better performance on the first stage of wet polishing. Very flexible.

4"

60 grit

$15

For polishing of concave or bowl shaped surfaces.

30, 50, 100, 200, 400, 800, 1500, 3000

3"

 4"

Set price - 8 pieces

$150

 $175

Buff black or buff white

$28

 $32

For polishing where the use of water is difficult or inconvenient.

50, 100, 200, 400, 800, 1500,3000, white buff, black buff

4"

Set price - 9 pieces

$120

Fast and efficient finishing of softer stones.

We recommend resin pads for polishing at grits higher than 400.

 3"

 4"

 5"

60

$15

120, 200, 400

 $15

5/8" - 11 thread

7"

Super flexible

Soft foam back

Set A - 3/32" or 1/8" - 10 pcs - $12

Set B - 3/32" or 1/8" - 10 pcs - $12

Set C - 1/8" - 50 pcs - $20

Set D - 1/4"- 10 pcs - $15

Set E - 1/4" - 20 pcs - $25

Set F - 1/8" - 50 pcs - $20

Set of 20 pieces in a wood box. 

1/4" shaft

Pictured close to actual size.

Brazed style outlasts electroplated style 5 to 10 times.

Set

30/40 diamond shown here. Actual burr size is larger

 20 piece set. 1/4" shaft

Sold individually, or save around 30 % if purchased as a set.

Carbide grit best for aggressive grinding on carving stones softer than marble. 

Diamond grit for long life on sculpture stones of any hardness

Specify grit:

Coarse carbide = 16 grit

Fine carbide = 24 grit

Diamond = 30/40 grit

$7

$18

$20

$18

$18

$18

$24

Sintered style has diamonds all the way into the core for long lasting use even on the hardest stones.

Use wet or dry. 1/4" shaft

Pictured approximately half of actual size. 

Measurement is Diameter x Height.

Long cylinder - 10 mm x 35 mm

$37

Short cylinder 15 mm x 13 mm

$34

Short cylinder 16mm x 16 mm (not pictured)

$36

Short cylinder 19 mm x 19 mm (not pictured)

$38

Flare cylinder

$32

Bullet

$32

Triangle

$32 

Choose 5 different pieces

$135

Burrs are larger than pictured.

Triangle - 15mm x 20mm

Box Set 

20 pieces in a wood box.

1/4" shaft

$175

6mm shaft.

6 mm shaft. Meant to be used with a little bit of water.

Specify shape: Triangle, Dome or Cylinder

Grits available: 600, 1200, 2000, 5000

Any grit - $5 

1/4" shaft. Apply polishing powder or paste to burr.

Dome - 20 mm x 20 mm

$2

Cylinder- 20 mm x 20 mm

$2

Ball - 20 mm

$2

Set of 3

$5

Brazed style outlasts electroplated blade by many times.

1/4" shaft.

Actual (cm)

35 mm

$24

40 mm

$27

45 mm

$30

Segmented style.

For long lasting use on stones ranging as hard as granite.

6mm shaft

Actual (cm)

25 mm

$25

40 mm

$28

Continuous rim style.

Little bit slower cutting than mounted blades but can be used for cutting, or grinding  using the top or bottom surface.

For long lasting use on stones ranging as hard as granite.

6 mm shaft 

Actual (cm)

15 mm

$19

25 mm

$21

30 mm

$22

35 mm

$23

6" diameter wheel fits on a regular bench grinder with a 1/2" or 5/8" arbor.

Fits on a regular bench grinder with a 1/2", 5/8" or 1" arbor.

60 grit

Additional types and sizes available.

12mm shank fits on a hand held drill or drill press. Allows water feed to drill bit tip while drilling (with the appropriate drill bits).

Two styles available:

Collet style (shown) - accepts drill bits sized approximately 6mm - 10mm

Threaded style - accepts drill bits with 5/8-11" female thread

  $95

Foam backing

Grit

Each

30

$16

120

$12

200, 400, 800, 1800, 3500

$11

Set of 8 pads listed above

$75

Velcro backing. Cut out any shape and make up your own tools.

120 x 180 mm (4.7 x 7.1 inches)

Grit

Each

60, 120, 200, 400 (electroplated)

$45

800, 1800, 3500 (resin)

$45

Set of 7 sheets

$270

Set of 10 pieces in a plastic pouch.

Available in 50 or 100 grit

Set Price

Small

Large

5  1/2"

6  1/2"

$10

$15

Set of 10 pieces in a plastic pouch.

Available in 50 or 100 grit

Length including handle approximately 5 1/2"

Set Price - $15

Set of 10 pieces in a plastic pouch.

Available in 50 or 100 grit

Set Price - $20

 10"

12"

 $28

---

 $28

$30

$28 

$30

Set of 5 pieces in a plastic pouch.

Available in 50 or 100 grit

Length including handle approximately 8 1/2"

Set Price -$17

The 5 shapes include flat, half round, triangle, square, and round.

Available in 50 grit or 100 grit

Length refers to approximate file working area not including the handle.

Length

Each

Set Price

8"

$14

$56

10"

$16

$64

12"

$18

$72

The 5 shapes include flat, half round, triangle, square, and round.

Available in 16 grit or 24 grit

Length refers to approximate file working area not including the handle.

Length

Each

Set Price

8"

$16

$64

12"

$20

$80

Length

Round

Half Round

6"

$2.50

$5.5

8"

$3.50

$7

10"

$4.50

$9

12"

$7

$12

Made to sculpt soft stones to those in the hardness range of marble.

Large picture of flat chisels  view 

Tooth chisels available, please inquire.

Large picture of point chisels  view 

Specify flat end, round tip or chisel tip.

Shaft Size

Each

3 - 5 mm

$4

5.5 - 7 mm

$5

7.5 - 9 mm

$6

9.5 - 11mm

$7

Weight

600g / 1.3 lb

Sold out

Allows pinned sculptures to be rotated on a base, and to be taken apart easily rather than being permanently fixed.

Actual size (mm)

Each

10 x 60

$18

18 x 120

$37

20 x 140

$45

Variable speed dial - 500 to 4500 rpm.

5/8" - 11 thread.

Polisher only

$130

Add 4" economy 9 piece resin polish pad set (save $25)

$180

A range of different models available. Included with the air hammer are 3 carbide tip chisels, 10 ft of air hose with a regulator and a canvas tool pouch.

$ - Please inquire

Model

4112

$155